|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The precision tooling and fine craftsmanship required in the manufacture of custom designed gaskets, tapes, and fabricated parts are solid reasons for coming to AEP. Machined or molded surface-to-surface contact is a key engineering concern in many industries. AEP will design any set of specifications and features. Whether rounded, angled, undercut, slit, or bored, we will meet your most demanding requirements, and in the formula best suited to the need. the growing demand for specialty tapes is met by AEP's selection of sponge, foam, and solid tapes, with many presure sensitive adhesive products available. Custom fabrication of shaped foam elements requires a high degree of technical sophistication. AEP excels at highly detailed precision applications, such as those used in sound shaping or the protection of delecate eletronic equiptment. EPDM, cork, nitrile, neoprene, silicone, Viton,* polyurethane, Nobestos,* and all natural rubber are all stock items.
Lustre-Caps® have many industrial uses...thread protection, metal finishing applications, grease fitting protection, color coating, etc.
Part No. | To Fit | I.D. | Length |
LC-9105 | .105 | .095 | 11/32 |
LC-9125 | 1/8 | .110 | 13/32 |
LC-9126 | 1/8 | .110 | 17/32 |
LC-9135 | .135 | .121 | 13/32 |
LC-9136 | .135 | .121 | 17/32 |
LC-9156 | 5/32 | .140 | 13/32 |
LC-9187 | 3/16 | .170 | 13/32 |
LC-9188 | 3/16 | .170 | 19/32 |
LC-9250 | 1/4 | .220 | 7/16 |
LC-9312 | 5/16 | .280 | 15/32 |
LC-9375 | 3/8 | .344 | 17/32 |
LC-9500 | 1/2 | .453 | 17/32 |
The demanding uses of rubber sheet stock and matting requires a thorough knowledge of both materials and manufacturing technology. That's where AEP exceeds.
Offering sheet stock up to 48 in. width, and in any desired length, AEP will deliver the product that meets your specific commercial or industrial needs - on time, and within budget.
Our full inventory of stock materials - ranging from cork to natural rubber, and including an array of synthetic materials such as EPDM, nitrile, Viton, PVC, vinyl, polyurethane, and silicone - is available to meet your most difficult requirements.
Our mats, whether simple entrance units or anti-fatigue, interlocking industrial-use floor coverings, all provide durable service, designed for the highest degree of safety. Logo inlays or other specialty features are easily accomodated.
Determining the right product for the job is not always easy. An AEP technical service representative is waiting to discuss any special application requirements you may have - no cost, and no obligation. Contact us today.
Accurate
Elastomer Products, Inc. 4370 Jutland Drive San Diego, CA 92117 Phone: (858) 273-6331 Fax: (858) 270-3351 Toll-Free: (800) 445-2354 Email Us At: bsales@accurateelastomer.com |